Samsung DVD-R120 Quick Setup Manual

Also see for DVD-R120: Instruction manual Instruction manual Quick setup guide Instruction manual Update guide

Contents

Step Getting ConnectedStep Basic OperationQuick Setup GuideStepStep Getting ConnectedSelect one of the following three types of connections:Antenna + DVD Recorder + TVAntenna + VCR/Satellite receiver + DVD Recorder + TVAntenna + DVD Recorder + TV Simplify the setting up procedure of your DVD RecorderConnect the RF cable as shown.Use the Video/Audio Cable to connect LINE AUDIOOUT(R/L)/VIDEO OUT jacks on the DVD Recorder to the Audio &Video jacks on the TV.• For better picture quality, if your TV has an S-Video jack, you canuse S-Video cable instead of the yellow video connector on theVideo/Audio cable.• For the best picture quality, if your TV has Component videojacks, you can use component cables instead of the yellow videoconnector on the Video/Audio cable. If the TV connected supportsProgressive Scan, press the P.SCAN button on the front of theDVD Recorder to enjoy higher quality video.If you have an AV amplifierConnect either audio cables from the LINE AUDIO OUT jacks on theDVD Recorder to the LINE IN jacks on your AV amplifier, or a digitalcable from the DIGITAL AUDIO OUT (COAXIAL or OPTICAL) jackon the DVD Recorder to the DIGITAL AUDIO IN jack on your AVamplifier.The VHF/UHF RF OUT jack of this product sends only signals received through the antenna. It does not output audio/video signals.You must use one of the following connections on this unit.1This Recorder will only record onDVD-R, DVD-RW and DVD-RAM discs.C Samsung Electronics Printed in KoreaTo RF INTo RF OUTRF CableTo ANT INPUTAV amplifier (receiver) ††…… DVD Recorder…… TVOR OROROR

/ 4

Related manuals for Samsung DVD-R120