Samsung DVD-R120 Quick Setup Manual

Also see for DVD-R120: Instruction manual Instruction manual Instruction manual Update guide Update guide

Contents

Step Getting ConnectedStep SetupStep Basic OperationQuick Setup GuideStepStep Getting ConnectedSelect one of the following three types of connections:Antenna + DVD Recorder + TV : No Cable BoxAntenna + Set-Top Box or VCR + DVD Recorder + TV : No Cable BoxAntenna + Cable Box + DVD Recorder + TVAntenna + DVD Recorder + TV : No Cable BoxConnect the signal source to the DVDRecorderUse a TV antenna or coaxial cable to connect the signal sourcecoming from the antenna or wall to the ANT IN jack on the DVDRecorder.Connect the DVD Recorder to the TVUse the supplied RF cable to connect ANT OUT on the DVDRecorder to the ANT jack on the TV. Then use the Video/AudioCable to connect LINE AUDIO OUT(R/L)/VIDEO OUT jacks on theDVD Recorder to the Audio & Video jacks on the TV. For better picture quality, if your TV has an S-Video jack,you can use S-Video cable instead of the yellow videoconnector on the Video/Audio cable. For the best picture quality, if your TV has Componentvideo jacks, you can use component cables instead of theyellow video connector on the Video/Audio cable. If the TVconnected supports Progressive Scan, press the P.SCANbutton on the front of the DVD Recorder to enjoy higherquality video.If you have an AV amplifierConnect either audio cables from the LINE AUDIO OUT jacks on theDVD Recorder to the LINE IN jacks on your AV amplifier, or a digitalcable from the DIGITAL AUDIO OUT (COAXIAL or OPTICAL) jack onthe DVD Recorder to the DIGITAL AUDIO IN jack on your AVamplifier.The ANT OUT jack of this product sends only signals received through the antenna. It does not output audio/video signals.You must use one of the following connections on this unit.1This Recorder will only record onDVD-R, DVD-RW and DVD-RAM discs.C Samsung Electronics Printed in KoreaAV amplifier (receiver) ††…… DVD Recorderœœ TVOR OROR00684A_quick guide_DVD 2/17/05 9:58 AM Page 1