Samsung DS-5000 User Manual

Also see for DS 5000 Series: User guide User instruction User guide Quick reference guide User instructions

Contents

11OUTSIDE CALLSMAKING AN OUTSIDE CALL• Lift the handset and press an idle outside line button, line group button or diala line access code to receive dial tone—OR—press an idle outside line button,line group button or dial a line access code to receive dial tone through thespeaker—OR—press SPEAKER, receive intercom dial tone and dial a lineaccess code.• Dial the telephone number.• Finish the call by replacing the handset or pressing the END button.NOTE: You will receive No More Calls tone when you attempt to make a call andthere is no button available for that line.• If Least Cost Routing is enabled on your phone system, this button may belabeled LCR or accessed by dialing an access code (usually 9).• If your system is programmed to require an authorization code before makinga call, dial plus a valid code before selecting a C.O. line.• If your system is programmed to require an account code before making acall, press the ACC button or dial 47 plus a valid bin number, press the ACCbutton again, or , and then select a C.O. line. See Account Codes for more infor-mation.For more information on authorization and account codes, see your systemadministrator.NOTE: If the Hot Keypad feature has been turned off, you must first lift the handsetor press the SPEAKER button before dialing.ANSWERING AN OUTSIDE CALL• Lift the handset and you are automatically connected to the ringing call.See Ring Preference under Customizing Your Keyset—OR—press the SEND but-ton to automatically answer on the speakerphone.NOTE: If a call is flashing at your keyset but not ringing, you must press the flash-ing button to answer.UNIVERSAL ANSWEROutside lines may be programmed to ring a general alerting device. To answercalls ringing this device, dial 67 or press the UA button. This device can operate inany one of the six different ring plans.NOTE: If the Hot Keypad feature has been turned off, you must first lift the handsetor press the SPEAKER button before dialing.