Samsung DB10E-TPOE User Manual

Also see for DB10E-POE: User manual Quick setup guide

29Input source control• FunctionThe input source of a product can be changed using a PC.• Viewing input source state (Get Input Source Status)Header Command ID Data length Checksum0xAA 0x14 0• Setting the input source (Set Input Source)Header Command ID Data length Data Checksum0xAA 0x14 1 "Input Source""Input Source": An input source code to be set on a product.0x14 PC0x18 DVI0x0C Input source0x08 Component0x20 MagicInfo0x1F DVI_video0x30 RF(TV)0x40 DTV0x21 HDMI10x22 HDMI1_PC0x23 HDMI20x24 HDMI2_PC0x25 DisplayPort― DVI_video, HDMI1_PC and HDMI2_PC cannot be used with the Set command. They only respond to"Get" commands.― This model does not support HDMI1, HDMI1_PC, HDMI2 and HDMI2_PC ports.― MagicInfo is only available with models that contain the MagicInfo function.― RF(TV), DTV are only available with models that include a TV.• AckHeader Command ID Data length Ack/Nak r-CMD Val1 Checksum0xAA 0xFF 3 'A' 0x14 "InputSource""Input Source": An input source code to be set on a product.• NakHeader Command ID Data length Ack/Nak r-CMD Val1 Checksum0xAA 0xFF 3 'N' 0x14 "ERR""ERR" : A code showing what error has occurred.