Samsung DB10E-TPOE User Manual

Also see for DB10E-POE: User manual Quick setup guide

156Specifications- Size- Display areaHVGeneralModel Name DB10E-T DB10E-POE / DB10E-TPOEPanel Size 10 CLASS (10.1 inches / 25 cm)Display area 217.0 mm (H) x 135.6 mm (V) / 8.54 inches (H) x 5.34 inches (V)Audio Output 5 W x 1 (Model DB10E-T is only supported.)Power Supply AC 100 to 240 VAC, 60 / 50 Hz ± 3 HzRefer to the label at the back of the product as the standard voltage can vary in different countries.EnvironmentalconsiderationsOperating Temperature : 32 F - 104 F (0 C - 40 C)* For installing the housing, keep the internal temperature at 40 °C or below.Humidity : 10% - 80%, non-condensingStorage Temperature : -4 F - 113 F (-20 C - 45 C)Humidity : 5% - 95%, non-condensingChapter 15― Plug-and-PlayThis monitor can be installed and used with any Plug-and-Play compatible systems. Two-way data exchange between the monitor and PC system optimizes the monitor settings.Monitor installation takes place automatically. However, you can customize the installation settings if desired.― Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may appear brighter or darker on the panel. This does not affectproduct performance.― This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.― For detailed device specifications, visit the Samsung Electronics website.(USA only)Dispose unwanted electronics through an approved recycler.To find the nearest recycling location, go to our website: www.samsung.com/recyclingdirect or call, (877) 278 - 0799