21EN 12/ CLEANING YOUR APPLIANCEFig. 15The filtration system consists of severalelements:-- The waste filter-- The large main filter-- The micro filterThe filters are located in the centre of the tuband must be washed regularly to obtain opti-mum washing results.Actions :➀➀ Before removing the filters, remove anywaste on the large main filter with asponge so that the waste does not block thesprinkler arms. Rotate the spray arm asshown in the drawing. (Fig. 14)➁➁ Loosen the waste filter a quarter of a turnand then remove it③③ Remove the main filter④④ Remove the micro filter⑤⑤ Carefully clean filters, andunder running water (Fig. 15)Re-installation:Proceed in reverse order, inserting filtersand and thenImportant :Remember to lock the waste filterin place by pushing it in fully and turning it aquarter turn.AAAABBCCCCBBAACCBBAABBCCBBAA• CLEANING THE WASTE FILTERSFig. 14AABBCC➁➁③③④④⑤⑤AA CCBB➀➀AA BB CC