Samsung D148W User Manual

10EN 5/ DETERGENT PRODUCTS AND ADJUSTING THE WATER SOFTENERImportant:It is very important to set the water softener correctly.- If the setting is too low, there is the risk of chalky marks appearing.- if the setting is too high, there is the risk of causing clouding of the glasses.If you relocate, adjust the water softener setting as required.• Traditional tabletsNon-multipurpose tablets should be placed in the external compartment (Fig 04) or, for optimumperformance, pull out the dispenser drawer and lay the tablet inside (Fig 05).• Powders or liquids (Fig 03)Fill at least up to the minimum mark for slightly dirty crockery and to the maximum mark for dirtycrockery. If the crockery is very dirty and for programmes with a pre-wash we recommend that youadd 5g of detergent (a dessert spoonful) into your dishwasher’s tub in accordance with the pro-grammes table.Important:Keep these products out of children’s reach and away from dampness.Only use products specially designed for dishwashers.Fig. 04Fig. 05Fig. 03• FOR TRADITIONAL PRODUCTS• Your machine must be specially adjusted to use traditional products.TTeessttiinngg ssttrriippHHaarrddnneessss 0-10°F 10-18°F 18-25°F 25-40°F 40-55°F 55-70°F > 70°FTTrraaddiittiioonnaallpprroodduucctt HIH0 H2 H3 H4 H5 H6• Proceed as follows to set the softener on the control panel:— Turn the selector to the “Set” position; the screen displaysSSEELL to inform you that you are in setting mode.— Press the ""DDeellaayyeedd ssttaarrtt”” button; the screen gives you thesetting (HH44 factory setting).— To change this setting (depending on hardness of water),press successively on the "Delayed start" button. Each presschanges the setting. Refer to the table below.— The setting is automatically confirmed when exiting Set; selector at programme or Stop position.