Page 58SamSung WireleSS router uSer manualIn the following section, the user will be able to configure the Guest Zone Wireless Network settings used by the 5GHzfrequency band.The following parameters can be configured:Enable Guest Zone: Tick this option to enable the Guest Zone feature for the frequency band 5GHz. Use thedrop-down menu to schedule the time that the Firewall rule will be enabled. The schedulemay be set to Always, which will allow the particular service to always be enabled. Clickthe New Schedule button to create your own times in the Schedules page.Wireless Band: Displays the frequency band used.Wireless Network Name: The Service Set Identifier (SSID) is the name of your wireless network. Create a name us-ing up to 32 characters. The SSID is case-sensitive.Security Mode: The security mode enables the user to configure wireless security for this wireless guestzone. For more information about wireless security, refer to the Wireless Settings page.Click on the Save Settings button to accept the changes made.Click on the Don’t Save Settings button to discard the changes made.