Samsung CY-SWR1100 User Manual

Also see for CY-SWR1100: Product highlights Quick installation guide User manual

Page 36SamSung WireleSS router uSer’S manualYou can configure the following parameters:Wireless Band: Displays the wireless band are configuring. On this page, you are configuring the optionsfor the 5GHz band.Enable Wireless: Check the box to enable the wireless function. If you do not want to use wireless, uncheckthe box to disable all the wireless functions. Select the time frame that you would like yourwireless network enabled. The schedule may be set to Always. Any schedule you createwill be available in the drop-down menu. Click New Schedule to create a new schedule.Wireless Network Name: The Service Set Identifier (SSID) is the name of your wireless network. Create a name us-ing up to 32 characters. The SSID is case-sensitive.Enable Auto ChannelSelection:Check the box to let the router choose the channel with the least amount of interferenceautomatically.Wireless Channel: By default, the channel is set to 36. You can change the channel to match the channel ofa an existing wireless network or to customize the wireless network. If you enable AutoChannel Selection, this option will be greyed out.Transmission Rate: Select the transmission rate. We strongly recommend you select Best (Automatic) for bestperformance.Wireless Mode: Select the preferred frequency band to use for this wireless network.Band Width: When using the 802.11n frequency band, you can choose between a 20MHz or 20/40MHzbandwidth.WMM Enable: WMM (Wi-Fi Multimedia) is QoS for your wireless network. Check this box to improvethe quality of video and voice applications for your wireless clients. This feature is notavailable in 802.11n configurations.Samsung Priority QoS: The Priority QoS function is unique to the CY-SWR1100.When you connect a Samsung TV to a Samsung wireless router using the 5GHz band, thisfunction gives the Samsung TV a priority connection and ensures your TV gets the fastestthroughput speed and displays the highest quality streaming contents.Check this box to use this funtion.Enabled Hidden Wireless: Check this box if you do not want the SSID of your wireless network to be broadcast. If theSSID is hidden, the SSID will not be seen by Site Survey utilities, so your wireless clientswill have to know the SSID of your router to connect to it.By default, the wireless security of this router is disabled. In this next option, you can enable or disable wireless security forthe 5GHz band. These settings are identical to those we’ve discussed for the 2.4GHz security earlier.Click the Save Settings button to accept the changes.Click the Don’t Save Settings button to discard the changes.