24_ connectionsconnectionsCONNECTING TO A TV (S-VIDEO)Connecting to your TV using an S-Video cable.You will enjoy high quality images. S-Video separates the picture element into black and white(Y) and color(C)signals to present clearer images than regular video input mode.(Audio signals are delivered through the audio output.)Using an S-Video cable (not included), connect the S-VIDEO OUT terminal on the rear of the Blu-ray Disc Playerto the S-VIDEO IN terminal of your TV.Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the Blu-ray DiscPlayer to the AUDIO (red and white) IN terminals of your TV. Turn on the Blu-ray Disc Player and TV.Press the input selector on your TV remote control until the S-Video signal from the Blu-ray Disc Player appearson your TV screen.If you have set the remote control to properly operate with your TV (see pages 18~19), press the TV INPUTSEL. button on the remote control and select S-VIDEO as the external source of the TV.The S-VIDEO source is always output in 480i resolution regardless of the set resolution in the SETUP menu.(See page 40)1.2.3.•M Audio Cable S-Video Cable(not included)WhiteRed
