Samsung BD-P1400 User Manual

Also see for BD-P1400: User manual Service manual User manual

Contents

22_ connectionsconnectionsCONNECTING TO A TV WITH DVI CABLEUsing the HDMI-DVI cable (not included), connect the HDMI OUT terminal on the rear of the Blu-ray Disc Playerto the DVI IN terminal of your TV.Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the Blu-ray DiscPlayer to the AUDIO (red and white) IN terminals of your TV.Turn on the Blu-ray Disc Player and TV.Press the input selector on your TV remote control until the DVI signal from the Blu-ray Disc Player appears onyour TV screen.If you have set the remote control to properly operate with your TV (see pages 18~19), press the TV INPUTSEL. button on the remote control and select HDMI as the external source of the TV.Connecting the HDMI cable while the Blu-ray player's power is on, the player's video output will automaticallychange to HDMI mode (see page 40).Depending on your TV, certain HDMI output resolutions may not work.Please refer to the user's manual of your TV.If an HDMI or HDMI-DVI cable is plugged into TV, the Blu-ray Disc Player’s output is set to HDMI/DVIautomatically within 10 seconds.If Component and HDMI are both connected, HDMI mode is automatically selected. (See page 40)When you connect the player to the TV using the HDMI cable for the first time or to a new TV, the HDMI outputresolution will be automatically set to the highest provided by the TVIf the HDMI cable is connected or removed during playback of a CDDA, MP3 or JPEG file, the player will stopplaying.1.2.3.•M HDMI-DVI cable(not included)Audio CableWhiteRed