Samsung BD-H6500 User Manual

Also see for BD-H6500: User manual User manual User manual User manual User manual

13 English03 C onnectionsConnecting to a Network RouterYou can connect your product to your networkrouter using one of the methods illustrated below.To use the AllShare network functionality, youmust connect your PC to your network as shownin the illustrations.The connection can be wired or wireless.Wired NetworkBroadbandserviceBroadbandserviceBroadband modem(with integrated router)BroadbandmodemRouterOr| NOTE |\ Your router or your Internet Service Provider's policiesmay prevent the product from accessing Samsung'ssoftware update server. If this occurs, contact yourInternet Service Provider (ISP) for more information.\ DSL users, please use a router to make a networkconnection.Wireless NetworkBroadbandserviceWireless Router| NOTE |\ If your wireless router supports DHCP, this product canuse a DHCP or static IP address to connect to the wirelessnetwork.\ Set your wireless router to Infrastructure mode. Ad-hocmode is not supported.\ The product supports only the following wireless securitykey protocols:- WEP (OPEN/SHARED), WPA-PSK (TKIP/AES),WPA2-PSK (TKIP/AES)\ Select a channel on the wireless router that is notcurrently being used. If the channel set for the wirelessrouter is currently being used by another device nearby, itwill result in interference and communication failure.\ If you select the Pure High-throughput (Greenfield)802.11n mode and set the Encryption type on your routerto WEP, TKIP or TKIP-AES (WPS2Mixed), the product willnot support a connection in compliance with new Wi-Ficertification specifications.\ Wireless LAN, by its nature, may cause interference,depending on the operating conditions (routerperformance, distance, obstacles, interference by otherradio devices, etc).