Samsung 6806-1247 User Manual

Contents

ADVANCEDSETTING UP THE CAMERA SYSTEMDATE / TIMEThis alters the time and date stored with the images.The DATE / TIME will only be displayed on the LCD monitor.When you print the image, the DATE / TIME will not be printed.Range : 2002~2100 year (leap years and months are corrected automatically).The default is 2002/01/01 00:00You will need to check and select the correct Date / Time when : The camera is used forthe first time.The batteries have been removed.1. Turn the camera power on.2. Rotate the mode dial to the SETUP mode.3. A menu will display on the LCD monitor.4. Press UP ( ) / DOWN ( ) button and select[DATE/TIME].5. Move to [DATE / TIME] sub menu by using the RIGHTbutton ( ) on the 5-function button.Selecting DATEIn step 5, select [DATE] by pressing UP ( ) /DOWN ( ) button and press OK button.Selecting TIMEIn step 5, select [TIME] by pressing UP ( ) / DOWN ( ) button and press OKbutton.6. To select YEAR/ MONTH / DAY or HOUR / MINUTE, press LEFT ( ) / RIGHT ( )button. To change the numbers, press UP ( ) / DOWN ( ) button.7. Press the OK button to confirm the setting at the [DAY] or [MINUTE] sub menu.NoteThe DATE and TIME will be displayed on the lower end of the LCD monitor in PLAY mode.The DATE and TIME will not be displayed in SHOT mode and will not printedy.DATE2002 1/ 1 0 : 0DATE / TIMESELECT OK SET