SETTING UP THE SHOOTING FUNCTIONSHOOTING MODEThis allows continuous shooting.In this mode, you can take moving subjects continuously.Once a continuous shooting sequence has been completed, the camera resets to singleshooting mode.1. Turn the camera power on.2. Rotate the mode dial to the STILL IMAGE mode or MACROSHOT mode.3. Do not turn the LCD monitor off.4. Press MENU button to display the menu on the LCD monitor.5. Press UP ( ) / DOWN ( ) button and select [SHOOTINGMODE].6. The cursor can be moved by pressing the RIGHT ( )button to the [SHOOTING MODE ] sub menu.7. Select the desired sub menu by pressing the UP ( ) /DOWN ( ) buttons. The default is SINGLE8. After selecting the desired sub menu, press the OK button toconfirm the setting.9. Press the MENU button to cancel the menu display.< STILL IMAGE mode >< MACRO SHOT mode >SINGLECONTINUOUSP1 SELECT OK SETSHOOTING MODESINGLECONTINUOUSP1 SELECT OK SETSHOOTING MODE
