Samsung 590 Series Installation Manual

Also see for 590 Series: Quick setup guide User manual

Contents

21EnglishNo Hotel TV Function DescriptionCategory initial value11 External SourceUSB MediaMode DefaultWhen USB is connected to the TV,y Default : Popup window appears.y Automatic : Enters the USB contents menuautomatically.y Disable : Neither the pop-up window or nor themenu appears.External SourceBanner ONUsers can set External Source Banner to On or Off.On : When TV power On or Mode changed, TV willdisplay the external source banner.Off : When TV power On or Mode changed, TV will notdisplay the external source banner.Auto Source OFFOn : When an external source is connected to the TV,the TV will auto ident and switch the input source.PC : Auto Ident PC Input only.Off : Auto Source is Off.Anynet+ ReturnSource Power On Src Set the return source after closing Anynet+.12 Bathroom SpeakerSub AMP mode 2Determines the Sub AMP operation mode.- 0: Turns the Sub AMP function off (PWM off).- 1: Determines the Sub volume according to the mainvolume control.That is, the sub volume is determined according to thePower On Volume, the Min Volume, and the Max- 2: Determines the volume according to the bathroomcontrol panel setting.Sub AMPvolume 6 Sub AMP Volume level at power on initial condition.13 Eco Solution Energy Saving OffThis feature adjusts the brightness of the TV in order toreduce power consumption.- Off: Turns off the energy saving function.- Low: Sets the TV to low energy saving mode.- Medium: Sets the TV to medium energy saving mode.- High: Sets the TV to high energy saving mode.14 Logo/MessageWelcomemessage OFF Display Welcome Message.Edit WelcomeMessage Edit Welcome Message.HospitalityLogo OFF Use can set the logo display Off or the type of logo file(BMP/AVI).HospitalityLogo DL - Download the logo file from USB toTV.Logo DisplayTime 5 Seconds Set the logo display time (3/5/7 Seconds).15 CloningClone TV toUSB - USB Clone: TV → USBClone USBto TV - USB Clone: USB → TVSetting AutoInitialize OFFWhen Setting Auto Initialize is set to On, and the poweris turned off and on or the Master Power is turned offand on, the data is restored to the cloned values.If there is no cloned value, even when the Setting AutoInitialize is set to On, it will be ignored and the operationwill be the same as that whenSetting Auto Initialize isset to Off[Hotel-590_690_790]BN68-04282R-Eng.indd 21 2012-07-26 오후 2:46:49