Samsung 2004KAISER2 Instruction Manual

ENG-17ENG-16DTSIf your A/V receiver is equipped with a DTS decoder,your DVD-VCR can output DTS digital sound, but youMUST enable this feature in the menu system.NOTE: Select “On” ONLY if you have connected aDTS-equipped A/V receiver to the Digital audioOut (coaxial) on the DVD-VCR rear panel.1 Open “MENU”Press the MENU button while the DVD is in Stopmode.2 Select “DVD”Use the UP/DOWN buttons to highlight “DVD”then press the ENTER button.3 Select “Audio”Highlight “Audio”, then press the ENTER button.4 Set “DTS”Highlight “DTS” then press the RIGHT button toselect one of the following options:• Off – To use your DVD/TV with an A/V receiverNOT equipped with a DTS decoder.• On – To use your DVD/TV with an A/V receiverequipped with a DTS decoderPCM Down Sampling : OnOffOnDigital OutputIf your A/V receiver is equipped with a Dolby Digitaldecoder, your DVD-VCR can output Dolby Digital 5.1sound, but you MUST enable this feature in the menusystem to prevent damage to your speakers.NOTE: Select “Bitstream” ONLY if you have connecteda Dolby Digital-equipped A/V receiver to theDigital Output (coaxial) on the DVD-VCR rearpanel.1 Open “MENU”Press the MENU button while the DVD is in Stopmode.2 Select “DVD”Use the UP/DOWN buttons to highlight “DVD”then press the ENTER button.3 Select “Audio”Highlight “Audio”, then press the ENTER button.4 Set “Digital Output”Highlight “Digital Output” then press the RIGHTbutton to select one of the following options:• PCM – To use your DVD/TV with an A/Vreceiver without a Dolby Digitaldecoder.• Bitstream –To use your DVD/TV with an A/Vreceiver with a Dolby Digital decoder.PCM Down Sampling : OnPCMBitstreamSubtitle LanguageTo set the Subtitle Language to your preferred language,follow these steps. If your preferred language isavailable on a DVD, your Subtitle Language willautomatically be set to the language you choose.1 Open “MENU”Press the MENU button while the DVD is in Stopmode.2 Select “DVD”Use the UP/DOWN buttons to highlight “DVD”then press the ENTER button.3 Select “Language”Move the selection bar to “Language” then pressENTER to select.4 Select “Subtitle”Highlight “Subtitle”, then press the ENTER button.5 Set “Subtitle Language” PreferenceHighlight your preferred language for subtitles, thenpress the ENTER button.SubtitleSubtitle LanguageAutomaticDynamic CompressionDynamic Compression restrains the dynamic range ofsounds, i.e. the difference between the loud and quietpassages of a DVD audio track.1 Open “MENU”Press the MENU button while the DVD is in Stopmode.2 Select “DVD”Use the UP/DOWN buttons to highlight “DVD”then press the ENTER button.3 Select “Audio”Highlight “Audio”, then press the ENTER button.4 Set “Dynamic Compression”Highlight “Dynamic Compression”, then press theRIGHT button to select one of the following options:• On – This will compress the total dynamic rangeof the DVD audio, making quiet passagesin the audio signal louder and loudpassages softer.• Off – This will preserve the original dynamicrange.PCM Down Sampling : OnOffOnOnOnOff