D6600 NetComConfiguration of the D6680 Network Adapter(s)D6600 NetCom System Guide© 2001 Radionics Page 27 46542CParameter Action requiredPress [ENTER] to leave at:Remote port (00000) 0000Pack Cntrl (00) 00Send Char 1(00) 00Send Char 2 (00) 00Note: The rest of these parameters will beseen only if this is a new D9133TTLthat has never been programmedbefore If your unit has beenprogrammed before you willautomatically arrive at the “savechanges and exit” function (nextstep). Table 9: New D9133TTL-E Parameters21. Press 9 [ENTER] to save changes and exit the TELNET session. A messageis displayed that the connection was lost. Click OK and close the TELNETwindow.Configuration of the D6680 Network Adapter is complete. Perform this procedure again for any additionalD6680’s you may have.
