1193) Quality and phase adjustment modeUsing the remote control, make adjustments with the 2 and 3 buttons. Using the operation panel, make adjustmentswith using the +, – buttons. The range of possible adjustments is 000 - 255. Values set in this mode become the centralvalues to be adjusted in Menu mode.The following parameters can be adjusted in this item.When VIDEO and Y/C are input : CONTRAST, BRIGHT., COLOR., TINT, SHARPNESSWhen RGB1 and RGB2 are input : CONTRAST, BRIGHT., CLK.FRQ., CLK.PHS., HOR.POS., VER.POS.* Adjustments cannot be carried out for PDP-V401E if PAL signals are input. Adjustment items will not also be displayed.4) Quality and phase adjustment mode (adjustment reset)This function returns adjusted values, and are set in adjustment mode to factory-preset values, which are within therange of values currently held in the selected memory area. Selecting “YES” with the remote control 2 button oroperation panel + button restores factory-preset values. Selecting “NO” with the remote control 3 button or operationpanel – button restores the current status. Select the following:“YES” to restore factory-preset values“NO” to avoid restoring factory-preset valuesand press the SET button.In either case, you are returned to the above adjustment mode when selection is complete.Performing adjustments on the plasma display operation paneland remote controlP I C T U R EC O N 1 2 8T R A S TP A R A M E T E RP I C T U R E P A R A M E T E RY E S N OI N I T I A L I Z E ?IW H B AET NL A ECTT O I NLA AI IT L ZI EDA D I OTI LN A E T U PS
