38EnOther Operations EnglishIncreasing color border contrast(CTI)Enhance color contour contrast as desired.MENU2/35/∞SET1 Press the MENU button to display the menuscreen.MENU INPUT3SCREEN SETUP OPTIONENTERSET EXITMENUPICTURE RESETCONTRASTBRIGHTNESSCOLORTINTSHARPNESS: 0: 0: 0: 0: 0PICTURE2 Use the 2/3 buttons to select [SETUP].SET MENU::DNRCOLOR TEMP.:MIDDLEMIDDLE::COLOR SYSTEMPURECINEMA OFFAUTO::CTI ONMPEG NR LOWAUTO POWER OFF DISABLEMENU INPUT3PICTURE SCREEN SETUP OPTIONCHANGE EXITMENU5/∞SET2/3Display operating panel Remote control unitOther Operations3 Use the 5/∞ buttons to select [CTI], then pressthe SET button.SET MENUMENU INPUT3PICTURE SCREEN SETUP OPTIONENTER EXIT::DNRCOLOR TEMP.:MIDDLEMIDDLE::COLOR SYSTEMPURECINEMA OFFAUTO::CTI ONMPEG NR LOWAUTO POWER OFF DISABLE4 Use the 2/3 buttons to select the desired [CTI]setting.SETSET EXITMENUON:CTIThe factory default setting is [ON]. Each time thebutton is pressed, the setting changes as shown:5 Press the SET button.The [CTI] function is set and the screen returns to thatshown in step 4.6 When finished with the setting, press the MENUbutton to return to the normal screen image.Note[CTI] settings are supported only for input signal from a videocomponent. Make settings individually for each input (INPUT1 toINPUT5), and for each signal type. (For INPUT2, PDP-505CMX/PDP-50MXE10/PDP-50MXE11 only)3 OFF 23 ON 2
