0970EnAbout network functionsThis unit can be connected to a network (LAN) to use thefunctions below.For details of the functions below, download the“HD-V9000 Communications Interface User’s Manual”from the Pioneer website.– Wake Up On LAN– Remote monitoring– Command control by LANFor details of the function below, download “HD PILOT”from the Pioneer website and view its help file.– Remote monitoring Wake Up On LANThis is a function for turning on this unit’s power via aLAN. This unit’s Wake Up On LAN setting to must be setto On (page 49). FTPThis is a function for transferring video or still picture filesto the SD memory card or USB storage device connectedto this unit via the LAN. To use it, the FTP items at thisunit’s Network Settings setting must be set (page 49). Remote monitoringThis is a function for monitoring this unit’s statusremotely. To use it, this unit’s Remote Port setting mustbe set (page 49). Command control by LANThis function is for controlling this unit using the LANwith the same commands as for serial control (page 65). NTPThis function is for automatically accessing an NTPserver via LAN to acquire the time information and setthis unit’s time. An Internet connection is required(page 49). RSSThis function is for accessing RSS sites to display textinformation (news, etc.) on the screen (Text Crawl).Check the format of the data distributed by the RSS site.This unit supports the formats below.Supported formats: RSS 1.0, RSS 2.0 and AtomCaution• A separate contract with/payment to an Internetservice provider is required to use RSS and NTPservices over the Internet.43 1 1 1 LIST 1444 1 1 1 LIST 1545 1 1 1 LIST 1646 1 1 1 LIST 1747 1 1 1 LIST 1848 1 1 1 LIST 1949 1 1 1 LIST 2050 1 1 1 RECALL51 1 1 1 SETUP52 1 1 1 MEMORY53 1 1 1 REPEAT54 1 1 1 FRM/TIME55 1 1 1 CLEAR56 1 1 DISPLAYNo. SW1 SW2 SW3 SW4 SW5 SW6 SW7 SW8 Function
