Pioneer HD-V9000 Operating Instructions Manual

Also see for HD-V9000: Specification sheet Technical manual Service manual

Contents

59En07 English Frame Segment PlayVideo files are played in units of frames. Repeat ListPlayback starts from the first line in the playlist.• Set this at the very last line.• When Repeat Mode is set to On, the list is playedrepeatedly, regardless of this Repeat List setting(page 47). Go to ListPlayback starts from the first line in the playlist of thespecified number. Input the number using the numberbuttons. Numbers 01 to 20 can be input.• Set this at the very last line.Note• The time and number of frames changed at Propertyis displayed in the Property contents display section.Line editing commandsThese are used to edit registered lines and add variousfunctions.Caution• The line editing commands cannot be edited onceregistration of a line is completed. Insert File PlayThis inserts a command to play video files in units of files.The video file selected at File Select is played from thebeginning according to the Property settings. For detailson the contents of the Property settings, see File Playunder Type Select setting on page 58. Insert Frame Segment PlayThis inserts a command to play video files in units offrames. The video file selected at File Select is playedfrom the beginning of the frame specified at Propertysettings. For details on the contents of the Propertysettings, see Frame Segment Play under Type Selectsetting on page 58. Add Image OverlayThis plays the specified still picture file superimposedover the video file according to the settings below.Property Setting DescriptionAudio On The audio is output.Off The audio is not output.Video On The video is output.Off The video is not output.Audio Adjust –10 to 00 The volume is decreased by theset dB value for outputLip Sync On The audio’s delay time can befine-adjusted at Lip SyncAdjust.Off The audio’s delay time isadjusted automatically.Lip Sync Adjust –10 to 00 to+16The video is displayed the setnumber of frames before theaudio.Start Time ** h ** m ** s This sets the time for startingplayback. Input the time usingthe number buttons.End Time ** h ** m ** s This sets the time for stoppingplayback. Input the time usingthe number buttons.Search Frame 11. Set the interval between Search Frame and Mark Frame to at least31 frames.*******(7-digitnumber)This specifies the starting pointfor the range to be played, inframes. Input the point usingthe number buttons.Mark Frame 1 *******(7-digitnumber)This specifies the end point forthe range to be played, inframes. Input the point usingthe number buttons.Property SelectionitemDescriptionTransparentColorBlack This sets black as thetransparent color for thespecified still picture file.White This sets white as thetransparent color for thespecified still picture file.Blue This sets blue as thetransparent color for thespecified still picture file.Green This sets green as thetransparent color for thespecified still picture file.Yellow This sets yellow as thetransparent color for thespecified still picture file.Red This sets red as the transparentcolor for the specified stillpicture file.TransparentRate0% The specified still picture file’stransparent color is nottransparent.25% The specified still picture file’stransparent color is slightlytransparent.50% The specified still picture file’stransparent color is halftransparent.75% The specified still picture file’stransparent color is quitetransparent.Start Time ** h ** m ** s This sets the time for startingplayback. Input the time usingthe number buttons.