Pioneer Elite PRO-950HD Operating Instructions Manual

Also see for Elite PRO-1150HD: Specifications

Contents

19EnPreparation 05speaker cablesNote• Press the lever and insert the end of the cable.• When you release the lever, itclamps onto the speaker cable.·Caution• Be sure to turn the connecteddevices off and remove the powercord from the wall outlet beforehand when changing theconnection or installation method.• If you insert the speaker cable too far so thatthe insulation is touching the speakerterminal, you may not get any sound.• Check if the end of the speaker cables are securely connectedto the terminals by slightly tugging on the cable after makingconnections. Loose connections may result in sound dropoutsor noise.• If there is a short in the  and  cables caused by an exposedlead wire, excessive load may be applied to the plasma display,resulting in interrupted operation or malfunction.• Incorrect connections of the speaker cable to the right or left ofthe plasma display terminals with respect to the polarity mayresult in insufficient stereo sound effects, delivering poor basssounds or unstable sound image.• Bundle the cable without pulling.Connecting the speaker cablesto the rear of plasma display.Gray GrayBlackBlackRed RedConnecting the speaker cablesto the speaker.Connect the cables correctly with respect tothe polarity of the speaker terminals, that is, cable (Gray) to terminals (Red) and cable (Black) to terminals (Black).GrayBlackBlack RedSpeaker terminalSpeaker terminal Speaker cable Speaker terminalConnect the cables correctly with respect tothe polarity of the plasma display speakerterminals, that is, cable (Gray) to terminals (Red) and cable (Black) to terminals (Black).Lever