97EnUse Other Equipment With Your Flat Panel TV 05Note: Do not use any USB devices other than those specified. Using other devices can cause a malfunction.Readable Data FormatThis system reads FAT16, FAT32 or NTFS.Readable Data FilesMovie, music, and photo files play with the exception of Digital Rights Management (WMDRM10) protected files.Your flat panel TV supports a single USB device at a time. Also, the panel does not support USB hubs.This system may not be able to display modified or edited content from a PC or other equipment.Your flat panel TV supports the USB Mass Storage Class and PTP devices.Some digital cameras may require a setup procedure for Mass Storage Class data transfer. The setup is done onthe camera. See the operating instructions supplied with the digital camera. Depending on the type of yourmemory card or camera, some images may fail to display.Remove a USB DeviceTo remove a USB device, exit the Home Media Gallery first then disconnect the device.Be sure to exit the Home Media Gallery screen before removing the USB device. If you remove the USB devicewhile the Home Media Gallery screen is displayed, data inside the memory may be damaged.Do not insert or remove the USB device immediately after the system is switched On or Off. This action may causedata inside the memory to be damaged.Pioneer is not liable for any loss or damage to the data inside the USB flash drive.Flat Panel TVUSB flash driveDigital Camera with USBMass Storage Class(PTP also supported)Flash media via USB adapter (Multi-card Reader)
