Audio Settings and Video Adjust menus0634En• If the player is outputting Dolby Digital,DTS or MPEG bitstream audio (in otherwords, no conversion to PCM), VirtualSurround has no effect on the audio fromthe digital output. See Digital Audio Outsettings on page 35 for how to set up thedigital output formats.• How good the surround effect is varies withthe disc.Dialog• Settings: High, Medium, Low, Off(default)The Dialog feature is designed to make thedialog stand out from other backgroundsounds in the soundtrack.Video Adjust menuFrom the Video Adjust screen you can adjustvarious settings that affect how the picture ispresented.1 Press HOME MENU and select ‘VideoAdjust’ from the on-screen display.2 Make settings using the/// (cursor) buttons, and ENTER.You can adjust the following picture qualitysettings:• Sharpness – Adjusts the sharpness ofedges in the picture (Fine, Standard(default), Soft).• Brightness – Adjusts the overallbrightness (–20 to +20).• Contrast – Adjusts the contrast betweenlight and dark (–16 to +16).• Gamma – Adjusts the ‘warmth’ of thepicture (High, Medium, Low, Off(default)).• Hue – Adjusts the red/green balance(Green 9 to Red 9).• Chroma Level – Adjusts how saturatedcolors appear (–9 to +9).• BNR – Switches on/off block noisereduction (On, Off (default)).Adjust the Brightness, Contrast, Hue andChroma Level settings using the / (cursorleft/right) buttons.3 Press ENTER to return to the VideoAdjust screen, or HOME MENU to exit.Video AdjustSharpnessBrightnessContrastGammaHueChroma LevelBNRStandard00Off00OffVideo AdjustBrightness min max 0