12SectionOther FunctionsEn 85English Español Deutsch Français Italiano NederlandsAttenuating audio volumeThe attenuator lets you lower the volume levelquickly (by about 90%).1 Press NEXT to display ATT.Press NEXT until ATT appears.2 Press ATT to turn the attenuator on.ATT appears in the display.• Press ATT again to turn the attenuator off andreturn to the original volume level.Displaying the clockYou can turn the time display on or off.Setting the time display on or off1 Press NEXT to display CLK.Press NEXT until CLK appears.2 Press CLK and then press ON/OFF to turnthe time display on.The light illuminates.• Press ON/OFF again to turn the time displayoff.• If you press BAND/ESC and exit the timemode, the time display will appear instead of thesource name.Time DisplayNote• If you do not operate the function within about60 seconds, the display is automaticallyreturned.Off clock displayWhen the time display is turned on, the calen-dar display appears with the time display whensources and the feature demo are off.