Multi-CD PlayerPausing CD playbackPause lets you temporarily stop playback of theCD.1 Press FUNC and then press PAUSE to selectthe pause mode.2 Press PAUSE to turn pause on.The light illuminates. Play of the current trackpauses.• Press PAUSE again to turn pause off.• When the pause mode is exited while pause ison, “PAUSE” is displayed in the basic display.Note• You can also turn pause on or off by pressingPAUSE in the following display.Entering disc titlesDisc title input lets you input up to 100 CD titlesup to 10 letters long (with ITS memory) into themulti-CD player. If you input a CD title, theentered title is displayed.1 Press 5 or ∞ to play a disc you want toenter the title.2 Press FUNC and NEXT and then press TTLinto select the disc title input mode.3 Press ABC to switch the character mode.Press ABC repeatedly to switch between thefollowing modes:Alphabet (upper case), numbers and symbols— Alphabet (lower case) — European letters,such as those with accents (e.g. á, à, ä, ç)• Press 012 to switch to the numbers and sym-bols mode.4 Press 5 or ∞ to select letters, numbers andsymbols.• To insert a space, select the flashing cursor“_”.5 Press 3 to move the cursor to the nextcharacter position.• Press 2 to move backwards in the display.En6407Section
