Pioneer 516-S/-K Operating Instructions Manual

Contents

Connecting up0412EnConnecting the multichannel analogoutputsFor DVD Audio and SACD playback, your DVDplayer may have 5.1 channel analog outputs.Inthis case, you can connect them to the multi-channel inputs of the receiver as shown below.1Connecting a satellite receiveror other digital set-top boxSatellite and cable receivers, and terrestrialdigital TV tuners are all examples of so-called‘set-top boxes’.1 Connect a set of audio/video outputs onthe set-top box component to the TV/SATAUDIO and VIDEO inputs on this receiver.2Use a stereo RCA phono cable for the audioconnection and a standard RCA video cable forthe video connection.2 If your set-top box has a digital output,connect it to a digital input on this receiver.The example shows an optical connection tothe DIGITAL OPT 1 (CD) input. 3Note1 The multichannel input can only be used when DVD 5.1 ch is selected (see page 30).COAXOPT(CD)ASSIGNABLEDIGITAL IN1FRONTR LSPEAKERS(DVR/VCR)COAX(DVD/LD)12ASSIGNABLEDIGITAL INRAAMLOOPFM UNBAL75 ΩINININMONITOROUTSUBWOOFERSURROUNDCEN-TEROUTVIDEOSUBWOOFERININININOUTOUTINCDLRDVR /VCRTV /SATDVD/LDPLAYCD-R/ TAPE/ MDFRONTPREOUTRECANTENNADVD 5.1CH INPUTD V D5.1CHINPUTAUDIOR LCENTEROUTPUT SUBWOOFEROUTPUTVIDEOOUTPUTSURROUNDOUTPUTFRONTOUTPUTR L R LThis receiverDVD/multi-channel decoderwith multi-channel analogoutput jacks2 If you've already connected your TV to the TV/SAT inputs, simply choose another input. However, you'll need to rememberwhich input you connected the set-top box to.3 In this case, you'll need to tell the receiver which digital input you connected the set-top box to (see The Input Assign menu onpage 36).COAXOPT(CD)ASSIGNABLEDIGITAL IN1(DVR/VCR)COAX(DVD/LD)12ASSIGNABLEDIGITAL INAMLOOPFM UNBAL75 ΩINININMONITOROUTOUTVIDEOSUBWOOFERININININOUTOUTINCDDVR /VCRTV /SATDVD/LDPLAYCD-R/ TAPE/ MDFRONTPREOUTRECANTENNAD V D5.1CHINPUTAUDIOR LDIGITAL OUTAV OUTVIDEOAUDIOR L2 1OPTICAL COAXIALSTBThis receiver