Parkside PSBM 1100 Operation And Safety Notes

Also see for PSBM 1100: Operation and safety notes

Contents

Parkside PSBM 1100 Operation And Safety Notes Manual pdf 8 page image

10 GB/IEPreselecting the rotation speedYou can preselect the required speed using thespeed preselector wheel 5 .j You can increase or decrease the speed byturning the speed preselector wheel. The mostsuitable speed depends on the material involved.We recommend that you carry out a fewpractical tests beforehand.Tip: You will always find these two basic guidelineshelpful:1. Large drill diameter = lower speed whilstsmaller drill diameter = higher speed2. Hard material = lower speedSelecting the directionof rotationCaution! Only change the position of the rotationdirection switch after the tool has come to a standstill.j Set the direction you wish the drill to rotate byusing the rotation direction switch 6 .Note: The tool operates at lower speeds whenrotating in the counter clockwise direction.Selecting the gearCaution! The gear selector switch must only bemoved after the drill has come to a standstill.j Select between the following speed rangesusing the gear selector switch 7 :1 = low speed range2 = high speed rangeSelecting drill / hammerdrill actionCaution! Only change the setting of the drill /hammer drill action switch after the tool has cometo a standstill.j Select the appropriate operating mode usingthe drill / hammer action selector switch 1 :Drilling:j Set the switch 1 to the right on to thedrill symbol.Hammer drilling:j Set the switch 1 to the left on to thehammer symbol.Note: The hammer drill action mode is intendedfor drilling into brick, concrete and stone only.Maintenance and cleaningAttention! Before carrying out any tasks on thedevice itself and when you are not using the device,always pull the mains plug out of the mains socket.The device is largely maintenance-free.j Always keep the device and the ventilationslots clean.j Clean the device frequently. For best results,clean the device immediately after you havefinished using it.j Do not allow any liquids to enter the device.Use a soft cloth to clean the device.j Do not under any circumstances use petrol orstrong solvents.j Store the device in a dry room.DisposalThe packaging is wholly composed ofenvironmentally-friendly materials thatcan be disposed of at a local recyclingcentre.Operation / Maintenance and Cleaning / Disposal

/ 10

Related manuals for Parkside PSBM 1100