Parkside PSBM 1100 Operation And Safety Notes

Also see for PSBM 1100: Operation and safety notes

Contents

Parkside PSBM 1100 Operation And Safety Notes Manual pdf 6 page image

8 GB/IESafetySafetySafety advice relatingspecifically to this deviceJ Keep children away from the device.Store the device indoors in an en-closed, dry place where it cannotbe reached by children.To avoid danger to life fromelectric shock:J Frequently check the condition of thedevice, mains lead and plug. Do notuse the device if these kinds of partsare damaged. Never open up the device. Alwayshave any repairs carried out or replacementparts fitted at the service centre or by an elec-trical equipment repair specialist. A damageddevice, mains lead or plug presents a seriousdanger to life from electric shock.J Have repairs carried out only by an electricianor your service centre.J Do not touch the mains lead if it becomesdamaged or cut through while you are usingthe device. Pull the plug out of the mains socketimmediately and have the device repaired bya suitably qualified person or at your servicecentre.J Do not operate the device if it isdamp and do not use it in a dampenvironment.J If you use the device outdoors, always connectit through a residual current device (RCD) witha maximum trip current of 30 mA. If using anextension lead, always use one that is ap-proved for outdoor use.J Do not use the device in rain or in wet conditions.J Do not work in areas where there may behidden electricity cables or gas or water pipes.Use a suitable detector or ask your local utilityservice providers. Contact with electricity cablescan lead to fire or electric shock. Damaging agas pipe can lead to an explosion. Penetrationof a water pipe can lead to property damageor to electric shock.Attention! To avoid the riskof injury:J Wear protective glasses, hearingprotection (noise can lead to hearingloss), dust protection mask andprotective gloves. Please note that working onstone or metal can give rise to hazardous duststhat can adversely affect your health.J Be particularly careful when screwing in longerscrews - the driver could slip off the screw head.J Use the auxiliary handle supplied with the device.Loss of control of the tool can lead to injury.J Securely support the workpiece. Use clamps ora vice to grip the workpiece firmly. This is muchsafer than holding it in your hand and it meansyou then have both hands free to operate theelectrical power tool.Working safely!J If a dangerous situation arises, pull the mainsplug immediately out of the mains socket.J Never use the device for a purpose for which itwas not intended.J Before you insert the mains plug into the socket,always check that the device is switched off.J Always keep proper footing and balance.J When taking a break from your work, beforecarrying out any tasks on the device itself andwhen you are not using the device, always pullthe mains plug out of the mains socket.J Handle the device carefully and treat it withrespect. Always keep the device clean, dryand free of oil or grease.J Remain alert at all times! Always watch whatyou are doing and proceed with caution.J Do not use the device if you cannot concen-trate or you are feeling unwell.