33PRESSURE TESTING1. The Rapid injector is used as a pressure test point.2. Connect the pressure gauge to the Rapid injector.3. Check the supply pressure by turning the Rapid burner on and one other hotplate burner full on and light theappropriate burner. The pressure should be either:-(i) For Natural Gas 20mbar(ii) For LP. Gas. The pressure must be set to 28 mbar for use on butane or 37 mbar for use on propane.4. Turn off the taps, disconnect the pressure gauge.5. Check operation of each hotplate burner.CHECKING THE GRILLPlace the grill pan containing the grid into the grill compartment. Open the grill door and turn the grill control to fullon. Visually check that the both elements are heating up.CHECKING THE HOTPLATELift the lid. Fit the burner crowns and caps ensuring that they are correctly seated. Fit the pan supports. Checkeach of the hotplate burners in turn by turning the hotplate tap to its full on position and pushing the ignitionbutton. As soon as the burners are lit the button can be released.CHECKING LID SHUT-OFF DEVICE1. Lift the lid2. Turn one hotplate tap to its full on position and push the ignition button.3. Close lid. There should now be no gas supply to the hotplate and the burner will go out.4. Turn off the hotplate and lift the lid. The gas supply should now be restored to the hotplate, when the tap isturned on.CHECKING THE MAIN OVEN1. Turn on the main oven thermostat to the highest setting.2. Ensure the oven is heating up by checking firstly that the oven neon illuminates.3. After a short period the heat from the oven element may be felt with the oven door open.4. Check that the oven light and the oven fan are functioning.CHECKING THE SECOND OVEN1. Ensure the oven door is closed.2. Turn on the second oven thermostat to the highest setting.3. Ensure that the oven is heating up by checking firstly that the oven neon illuminates.4. After a short period the heat from the oven element may be felt with the oven door open.GENERAL NOTEInstruct the user on how to use the appliance and its ignition system. Refer the user to the wording on the insidecover which gives advice on the safe operation of the appliance.INSTALLATION INSTRUCTIONS