1.7 Useful Features1-82 OperationsCancelling Features (Extension Feature Clear)Allows you to reset the following extension features to the default settings.a) Absent Message Capabilityb) Automatic Callback Busy (Camp-On)c) Background Music (BGM)d) Call Forwardinge) Call Pickup Denyf) Call Waitingg) Data Line Securityh) Do Not Disturb (DND)i) Executive Busy Override Denyj) Log-In/Log-Outk) Message Waiting– (All messages will be erased.)l) Pickup Dialling– (The stored telephone number will beerased.)m) Paging-Denyn) Room Monitoro) Timed Reminderp) Voice Mail IntegrationClearing the current feature settingsAny TelephoneDial 79#.7 9 #Lift the handset or pressSP-PHONE/MONITOR.Hang up or pressSP-PHONE/MONITOR.Confirmation toneand dial toneAlternate Calling — Ring/Voice“Voice Call” which is set at the called party’s extension can be switched to “Tone Call”(ringing) and vice versa. This feature must be set beforehand at the called party’s extension.Refer to Proprietary Telephone Settings (Section 1.2). A rotary phone cannot use this feature.Any TelephoneOff-hook. Enter an extension number. Ring back toneConfirmation tone (1 beep) Dial .extension no.Voice to ToneOff-hook. Enter an extension number. Dial .extension no.Tone to VoiceRing back tone Confirmation tone (1 beep)• See the Installation Manual, Section 3, “Extension Feature Clear”.+• See the Installation Manual, Section 3, “Alternate Calling — Ring/Voice”.+• Single line telephone users can dial “0” instead of “#”.
