1.6 Before Leaving Your Desk1-52 OperationsForwarding Calls (Call Forwarding)Automatically transfers incoming calls to another extension or to an external destination. Thefollowing types are available.Note: You can also set Voice Mail as the forwarding destination. Refer to “Voice MailIntegration for KX-TVP100” in this manual.• To cancel the Call Forwarding features, refer to “Cancel” in this feature.• Call Forwarding can only be extended to one target telephone. For example, extension A isforwarded to extension B, and if extension B tries to set Call Forwarding to extension C, analarm tone is heard and the setting is rejected.If extension B has already set Call Forwarding to extension C, and extension A tries to setCall Forwarding to extension B, the setting will be also rejected.• If the destination extension has already set “Do Not Disturb”, you cannot forward any callsto the extension.• There should be at least one extension that can receive calls in the same UCD group.• When a UCD extension which sets “Call Forwarding” function receives a call, the call willnot be forwarded and the system will search for an idle extension in the UCD group first.But if the UCD extension is the last one that can receive the call, it will be forwarded to theassigned extension by “Call Forwarding”.• Setting a new “Call Forwarding” function (All Calls, Busy or No Answer, etc.) cancels anyother “Call Forwarding” functions or the “Do Not Disturb (DND)” function.• If your entry is valid, confirmation tone 1 (1 beep) is sent. If your entry is the same aspreviously programmed data, confirmation tone 2 (2 beeps) is sent. Refer to the “Tone List”in the Appendix (Section 2).• You can call the original extension from the Call Forwarding destination extension (forexample: Boss/Secretary working).• Camp-On recall and Hold recall are not forwarded.Ext AExt B Ext C(Yes) Ext AExt B Ext C(Yes)!!TYPE DESCRIPTIONAll CallsBusy or No AnswerFollow MeTo Exchange LineAll incoming calls are forwarded to another extension.All incoming calls are forwarded to another extension when you do notanswer or when your extension is busy.Allows you to set “Call Forwarding — All Calls” feature from anotherextension.All incoming calls are forwarded to an exchange line.
