1.9 DSS Console FeaturesOperations 1-101Operator / Manager/ DSS Console Operations• DSS buttons can be changed to any of the following function buttons.a) Another DSS Button (Every DSS button can be assigned to another extension number.)b) One-Touch Dialling Buttonc) Day Button (Operator/Manager only)d) Night Button (Operator/Manager only)e) Lunch Button (Operator/Manager only)f) Extension Lock Button (Operator/Manager only)• PF buttons can be changed to One-Touch Dialling buttons.• When the STORE button is pressed after programming, you will hear beep tones as follows.— 1 beep: The entry is different from the one that was stored previously.— 2 beeps: The entry is the same as the previously stored one.• You can check the stored data in the following way.1. Set the MEMORY switch to “PROGRAM”.2. Press the desired button while on-hook.The data will be displayed. After checking the data return the MEMORY switch to the“SET” position.• 1.2 Proprietary Telephone Settings, “Customising the Buttons on Your Telephone”,DSS Button,One-Touch Dialling Button!!+An extension can be called and accessed by simply pressing a DSS button. The BLF shows ifthe extension is engaged.PT and DSS ConsolePress the desired DSS button.[DSS Console]Lift the handset or pressSP-PHONE/MONITOR.[Paired Telephone]PT and DSS ConsolePress the desired DSS or PF button.[DSS Console]Lift the handset or pressSP-PHONE/MONITOR.[Paired Telephone]The stored number is dialled automatically by pressing a programmed DSS or PF button.One-Touch DiallingDirect Extension Dialling• By System Programming you can press a DSS button directly to make an intercom callwithout going off-hook.!!
