Panasonic WVSF332 - IP NETWORK CAMERA Installation Manual

Also see for i-Pro WV-SF332: Product catalog Integration note Specifications Product catalog Operating instructions

Panasonic WVSF332 - IP NETWORK CAMERA Installation Manual Manual pdf 29 page image

29Adjustmentz Adjust the camera angle. When determining the camera angle, repeat fine adjustments bygradually moving the panning table, tilting table, and azimuth adjustment ring.Horizontal position (Panning)Loosen the panning lock screw, rotate the panning table to adjust the pan direction. (Adjustablerange: 350 °)Panning is possible within the range of 180 ° (when panning clockwise) and 170 ° (when panningcounterclockwise). After adjustment, tighten the panning lock screw to fix the panning table.(Recommended tightening torque: 0.39 N.m {0.29 lbf·ft})FRONTTOPMONITOROUTLOCK12V=INBASE-T/BASE TXEXTTOPHome position markers KPanning tablePanning lock screw[LOCK]Home position* The position where the homeposition markers are alignedCounterclockwise panningend maker: (Rotation withinthe range of 170 °)Clockwise panning endmarker: (Rotation within therange of 180 °)Vertical position (Tilting)Loosen the tilting lock screws (x2), and rotatethe tilting table to adjust the tilting direction.(Adjustable range: ±75 °) Since a variable focallens is used, it is possible to change the angu-lar field of view. This lens can also be rotated inthe reverse direction, but the image azimuth isreversed. In this case, the image azimuth canbe modified when the panning table is rotatedto the direction of clockwise panning (180°).q Angle)>Horizontal: 27.7 ° (TELE) to 100.3 ° (WIDE)Vertical: 20.8 ° (TELE) to 73.5 ° (WIDE)After adjustment, tighten the tilting lock screws (x2) to fix the tilting table.(Recommended tightening torque: 0.59 N·m {0.44 lbf·ft})+75 °–75 °Adjustable range