Panasonic WVSF332 - IP NETWORK CAMERA Installation Manual

Also see for i-Pro WV-SF332: Product catalog Integration note Specifications Product catalog Operating instructions

Panasonic WVSF332 - IP NETWORK CAMERA Installation Manual Manual pdf 11 page image

11PrecautionsRefer installation work to the dealer.Installation work requires technique and experi-ences. Failure to observe this may cause fire,electric shock, injury, or damage to the prod-uct.Be sure to consult the dealer.Stop the operation immediately whensomething is wrong with this product.When smoke goes up from this product or thesmell of smoke comes from this product, stopthe operation immediately and contact yourdealer.Turn the power off immediately and contactqualified service personnel for service.Do not attempt to disassemble or modifythis product.Failure to observe this may cause fire or electricshock.Consult the dealer for the repair or inspections.Do not insert any foreign objects.This could permanently damage the apparatus.Turn the power off immediately and contactqualified service personnel for service.Select an installation area that can sup-port the total weight.Selecting an inappropriate installation surfacemay cause the product to fall down or toppleover, resulting in injury.Installation work shall be started after sufficientreinforcement.Periodic inspections shall be conducted.Rust on the metal parts or screws may cause afall of the product resulting in injury or acci-dents.Consult the dealer for the inspections.Do not use this product in an inflammableatmosphere.Failure to observe this may cause an explosionresulting in injury.Avoid installing this bracket in the loca-tions where salt damage occurs or corro-sive gas is produced.Otherwise, the mounting portions will deterio-rate and accidents such as a fall of this productmay occur.The exclusively designed mount bracketshall be used.Failure to observe this may cause a drop result-ing in injury or accidents.Use the exclusively designed mount bracket forinstallation.The screws and bolts must be tightened tothe specified torque.Failure to observe this may cause a drop result-ing in injury or accidents.Do not install this product in locationssubject to vibration.Loosening of mounting screws or bolts maycause a fall of the product resulting in injury.Install this product in a location highenough to avoid people and objects frombumping the product.Failure to observe this may cause a drop result-ing in injury or accidents.Do not strike or give a strong shock to thisproduct.Failure to observe this may cause fire or injury.Do not rub the edges of metal parts withyour hand.Failure to observe this may cause injury.Turn the power off when do wiring of thisproduct.Failure to observe this may cause electricshock.In addition, short circuit or wrong wiring maycause fire.