42• BasicPower source: 12 V DC, PoE (IEEE802.3af compliant)Power consumption: SW559 12 V DC: 850 mA, PoE 48 V: 180 mA (Class 0 devices)SW558 12 V DC: 830 mA, PoE 48 V: 175 mA (Class 0 devices)* ONLY CONNECT 12 V DC CLASS 2 POWER SUPPLY (UL1310/CSA 223) or LIMITED POWER SOURCE (IEC/EN/UL/CSA 60950-1).Ambient operating temperature: -40 °C to +50 °C {-40 °F to 122 °F}*Ambient operating humidity: Less than 90 % (no condensation)Waterproof: Camera: IP66 (IEC60529)* Only when installation work specified in this book is properlyperformed and appropriate waterproof treatment is performedShock resistance: Compliant with 50 J (IEC 60068-2-75)/IK10 (IEC 62262)Monitor output (for adjusting theangular field of view): VBS: 1.0 V [p-p]/75 Ω, composite signal, RCA jackEXT I/O terminal cable: SW559 ALARM IN1/ DAY/NIGHT IN,ALARM IN2/ ALARM OUT,ALARM IN3/ AUX OUT (x1 for each)SW558 ALARM IN, ALARM OUT, AUX OUT (x1 for each)Microphone/line input cable SW559 : ø3.5 mm monaural mini jackInput impedance: Approx. 2 kΩFor microphone input: Applicable microphone: Plug-in power typeSupply voltage: 2.5 V ±0.5 VFor line input: Input level: Approx. –10 dBVAudio output cable SW559 : ø3.5 mm stereo mini jack (monaural output)Output impedance: Approx. 600 ΩLine levelDimensions: ø164 mm x 146 mm (H) x 191.5 mm (W){ø6-15/32 inches x 5-3/4 inches (H) x 7-17/32 inches (W)}(including projection of the base cover fixing screw)Mass: Approx. 1.6 kg {3.53 lbs}Finish: Main body: Aluminum die cast, light grayDome section: Clear polycarbonate resin* When using this product without turning the power off. (However, the temperature inside the cam-era shall be -10 °C {14 °F} or higher.) Perform settings or startup operations when the ambienttemperature is -30 °C {-22 °F} or higher. The auto focus function is not available until the heaterunit of the camera raises the internal temperature of the camera.Specifications