1.2 About the “Live” pageO P SQ RNABDEFCGHIVUTLMJK[select language] pull-down-menuThe camera’s display language can be selected. The default language can be set in the [Language] in the[Basic] settings. (®page 46)[Setup] button*1Displays the setup menu. The button will turn green and the setup menu will be displayed.[Live] buttonDisplay the “Live” page. The button will turn green and the “Live” page will be displayed.[Compression] buttons• [H.264] button: The letters “H.264” on the button will turn green and an H.264 image will be displayed.When “On” is selected for “H.264 transmission” of “H.264(1)”, “H.264(2)”, the [H.264] button will bedisplayed. (®page 78)• [JPEG] button: The letters “JPEG” on the button will turn green and JPEG image will be displayed.[Stream] buttonsThese buttons will be displayed only when an H.264 image is displayed.• [1] button: The letter “1” will turn green and images in the main area will be displayed in accordancewith the setting of “H.264(1)”. (®page 78)• [2] button: The letter “2” will turn green and images in the main area will be displayed in accordancewith the setting of “H.264(2)”. (®page 78)[Image capture size] buttonsThese buttons will be displayed only when a JPEG image is displayed.• [VGA] button: The letters “VGA” will turn green and images in the main area will be displayed in VGAsize.• [QVGA] button: The letters “QVGA” will turn green and images in the main area will be displayed inQVGA size.• [1280x960] button: The letters “1280x960” will turn green and images in the main area will bedisplayed in 1280 x 960 (pixels).10 Operating Instructions1 Monitor images on a PC