• Unavailable characters: " & ; : / * < > ? \ |• Default: None (blank)Note• When “Name w/time&date” is selected, the file name will be [“Entered file name” + “Time and date(year/ month/ day/ hour/ minute/ second)” + “Serial number (starting from 00)”] + “s” during summertime.[Transmission interval]Select the interval for the FTP periodic image transmission from the following.1s/ 2s/ 3s/ 4s/ 5s/ 6s/ 10s/ 15s/ 20s/ 30s/ 1min/ 2min/ 3min/ 4min/ 5min/ 6min/ 10min/ 15min/ 20min/ 30min/1h/ 1.5h/ 2h/ 3h/ 4h/ 6h/ 12h/ 24h• Default: 1s[Image capture size]Select the capture size of images to be transmitted from the following.When “2 mega pixel [16:9]” is selected for “Image capture mode”640x360/320x180When “1.3 mega pixel [16:9]” is selected for “Image capture mode”1280x720/640x360/320x180When “1.3 mega pixel [4:3]” is selected for “Image capture mode”1280x960/VGA/QVGA• Default: 640x360Note• When “3 mega pixel [4:3]” is selected for “Image capture mode”, FTP periodic image transmissioncannot be used.17.7 Configure the schedule settings of the FTPperiodic image transmission [FTP img. trans.]Click the [FTP img. trans.] tab on the “Network” page. (®page 40, page 42)The schedule settings of the FTP periodic image transmission can be configured in this section. Refer topage 164 for further information about the settings relating to the FTP periodic image transmission.166 Operating Instructions17 Configuring the network settings [Network]
