Panasonic WV-NP304 Installation Manual

Also see for WV-NP304: Product catalog Integration note Brochure Reference Comparison chart

Panasonic WV-NP304 Installation Manual Manual pdf 12 page image

12Major operating controls and their functionsLOCKWV-NP304INITIAL SETLOCKWV-NP304INITIAL SETwqe rtAbout the [INITIAL SET] buttonTurn on the power of the camera while holding down the button, and wait for around 5 secondswithout releasing this button. Wait another 30 seconds after releasing the button. The camerawill restart and the settings including the network settings will be reset to the default. Front/Side Viewq Flange-back length adjustment ringAdjust the flange-back length by rotatingthis ring.Before adjusting the flange-back length,adjust the lens first. ( page 16)w SD memory card slot coverCover the SD memory card slot to pro-tect the SD memory card in the slot.( page 28)e Initialization button [INITIAL SET]Use this button to reset the settings ofthe camera to the default settings.Turn off the power of the camera. Then,turn on the power of the camera whileholding down this button and wait around5 seconds without releasing this button.Wait around 30 seconds after releasingthe button. The camera will restart andthe settings including the network andthe date/time settings will be initialized.r SD memory card slotInsert an SD memory card. ( page 28)t Flange-back length fixing screwFix the adjusted flange-back length usingthis screw. ( page 18)