Panasonic WV-CW480S Operating Instructions Manual

Also see for Super Dynamic III WV-CW480S: Brochure & specs Specification sheet Specifications Operating instructions

Contents

Panasonic WV-CW480S Operating Instructions Manual Manual pdf 20 page image

Important:After pan/tilt/azimuth adjustment, firmly tight-en the panning lock screw and tilting lockscrew.(Recommended tightening torque: 0.59 N·m)3. Zoom• Unlock the zoom lever.• Move the lever to adjust the zoom.• Lock the lever.4. Focus• Unlock the focus lever.• Move the lever to adjust the focus.• Lock the lever.20WIDEWIDENEARNEARFocus leverZoom leverFARTELEWIDENEARImage AdjustmentYou can manually adjust the pan/tilt/azimuthangles, focus, and zoom while observing theconnected monitor.Notes:• When connecting an LCD monitor toadjust the camera images, use an L-typemini plug. Straight type plugs are notavailable.• Do not hold the camera by lens unit toadjust panning, tilting, or azimuth.• The video output to the BNC will be inter-rupted while an LCD monitor is connect-ed to the monitor output jack.• While an LCD monitor is connected tothe monitor output jack, ELC (ElectricLight Control) becomes effective toobtain a proper focus. During focusadjustment, blooming or smear on high-lighted objects may be caused.However, ALC (Automatic Light Control)is effective during the normal use, andblooming or smear is reduced.• Adjust zoom and focus after adjustingpanning and tilting. (Refer to Step 3 and4.)1. Connect an LCD monitor to the monitoroutput jack.2. Pan/tilt/azimuth adjustment• Loosen the three screws locking the panand tilt tables.• Pan and tilt the table to aim the cameraat what you need to watch.• Turn the azimuth adjuster to obtain alevel image.• Tighten the three screws after adjusting.LOCKPanning tableTilting lock screw75°Panning lock screwMonitor output Jack(3.5 diam. mini jack)Azimuth(Angle adjuster)