1. Do not attempt to disassemble the camera.To prevent electric shock, do not remove screws or covers.There are no user-serviceable parts inside. Ask qualified service personnel for servic-ing.2. Handle the camera with care.Do not abuse the camera. Avoid striking, shaking, etc. The camera could be damagedby improper handling or storage.3. Do not expose the camera to rain or moisture, not try to operate it in wet areas.If the camera becomes wet, turn the power off immediately and ask qualified servicepersonnel for servicing. Moisture may damage the camera and also cause electricshock.4. Do not use strong or abrasive detergents when cleaning the camera body.Use a dry cloth to clean the camera when dirty. When the dirt is hard to remove, use amild detergent and wipe gently. Then wipe off the remaining detergent with a dry cloth.5. Clean the CCD faceplate with care.Do not clean the CCD with strong or abrasive detergents. Use lens tissue or a cottontipped applicator and ethanol.6. Never face the camera towards the sun.Do not aim the camera at bright objects. Whether the camera is in use or not, neveraim it at the sun or other extremely bright objects. Otherwise, blooming or smear maybe caused.7. Do not operate the camera beyond the specified temperature, humidity or powersource ratings.Use the camera at temperatures within –10 °C to +50 °C (14 °F - 122 °F), and humiditybelow 90 %. The input power source is 24 V AC.8. Turn the circuit breaker off which supplies the camera with the power whenabnormal conditions are encountered.PRECAUTIONSBefore attempting to connect or operate this product,please read these instructions carefully and save this manual for future use.The exclamation point withinan equilateral triangle is intend-ed to alert the user to the pres-ence of important operatingand maintenance (servicing)instructions in the literatureaccompanying the appliance.The lightning flash with arrow-head symbol, within an equilat-eral triangle, is intended toalert the user to the presenceof uninsulated "dangerous volt-age" within the product's enclo-sure that may be of sufficientmagnitude to constitute a riskof electric shock to persons. The serial number of this product may be foundon the top of the unit.You should note the serial number of this unitin the space provided and retain this instructionas a permanent record of your purchase to aididentification in the event of theft.Model No.Serial No.SA 1966SA 1965N1101-1121 V8QA5931BN Printed in JapanN 19Panasonic's WV-CW474F/CW474S series color digital camera introduces a new level of highpicture quality and high resolution through the use of a 1/3-inch interline transfer CCD imagesensor having 768 horizontal pixels (picture elements), and digital signal processing LSIs.This model offers cutting-edge technology for advanced video surveillance.PREFACECaution:To prevent fire or electric shock hazard, use a UL listed cable (VW-1, style 1007) forthe 24 V AC Input Cable.Color CCTV CamerasOperating InstructionsWARNING:To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,DO NOT REMOVE COVER (OR BACK).NO USER-SERVICEABLE PARTS INSIDE. REFER SER-VICING TO QUALIFIED SERVICE PERSONNEL.CAUTIONRISK OF ELECTRICSHOCK DO NOT OPENNOTE: This equipment has been tested andfound to comply with the limits for a Class Adigital device, pursuant to Part 15 of the FCCRules. These limits are designed to providereasonable protection against harmful interfer-ence when the equipment is operated in acommercial environment. This equipment gen-erates, uses, and can radiate radio frequencyenergy and, if not installed and used in accor-dance with the instruction manual, may causeharmful interference to radio communications.Operation of this equipment in a residentialarea is likely to cause harmful interference inwhich case the user will be required to correctthe interference at his own expense.FCC Caution: To assure continued compli-ance, (example - use only shielded interfacecables when connecting to computer orperipheral devices). Any changes or modifica-tions not expressly approved by the partyresponsible for compliance could void theuser’s authority to operate this equipment.For U.S.AModel No. WV-CW474FWV-CW474S