6PrefaceThis product is a 1/3-type CCD color CCTV camera. Connection of this product to a video monitorallows users to use this product as a monitoring camera.• WV-CP630: 120 V AC power supply, with color / black-and-white mode switch function• WV-CP634: 24 V AC, 12 V DC power supply, with color / black-and-white mode switch functionFeaturesIntroduction of newly developed high-resolution CCDThe introduction of the newly developed CCD with 976 horizontal pixels has led to a horizontal res-olution of as high as 700 TV lines.Super Dynamic 6For photographic subjects which contain high contrast between the bright and dark areas, lightcompensation on the pixel level will result in more natural-looking images.Auto back focus function (ABF) equippedMoving the CCD inside the camera to an optimal position with the operation button of this unit orthe setup menu allows users to automatically adjust the back focus.The back focus is adjustable with the setup menu through the system controller (option) even afterinstallation of this unit.The auto back focus function also allows users to correct out of focus when changing betweencolor and black-and-white images.High sensitivity achieved because of noise reduction functionSensitivity at the following minimum illuminations has been accomplished for color images becauseof the introduction of low noise circuit design (F1.4) :0.08 lx (color), 0.008 lx (black-and-white)Day/Night conversion function equippedNo setup change is required at night because the image automatically changes from the colormode to the black-and-white mode at low illuminance.Bright images can be captured at night because of automatic switching of IR filters at low illuminance.Motion detection function (VMD) equippedThe motion of an object is detectable. The acts of covering the camera with a cloth, a cap or otheracts and changing the camera direction during surveillance can be detected.Note:• The VMD function is not the dedicated function to prevent thefts, fires, etc. We are not respon-sible for any accidents or damages caused by applying the function for the above purposes.