Panasonic WV-CP630 Installation Manual

Also see for WV-CP630: Installation guide Operating instructions

Contents

Panasonic WV-CP630 Installation Manual Manual pdf 23 page image

23Setup menuPerforming each setting item in the setup menu should be completed in advance to use this unit. Performthe settings for each item in accordance with the installation conditions and customer requirements.List of setup menuSetup item DescriptionCAMERA ID This item specifies the camera title. The camera title that indicates thecamera location and other information about the camera is created withalphanumeric characters and symbol, and then displayed on the screen.CAMERA Performs the camera operation settings.SCENE 1/SCENE 2Selects a scene file. It is possible to register and save the settings as ascene file in case that it is necessary to change the settings such whenshooting at night.ALC/ELC Selects the method of controlling the quantity of light in accordance withthe lens to be used.SHUTTER Specifies the electronic shutter speed.AGC Specifies gain adjustment.SENS UP Specifies electronic sensitivity enhancement.WHITE BAL Specifies white balance adjustment.DNR Selects the level of the digital noise reduction function.D&N (IR) Performs each setting regarding the black-and-white mode such asswitching between color and black-and-white images.VMD Performs settings regarding VMD (Video Motion Detection).SYSTEM Performs the settings regarding the camera system such assynchronization and privacy zone.SYNC Specifies the synchronization type.ALARM IN/OUT Performs the settings of the alarm input/output terminal.PRIVACY ZONE Hides undesired portions in the camera shooting area.STABILIZER Decides whether or not to enable the image stabilizer.EL-ZOOM Switches the electronic zoom on and off.UPSIDE-DOWN Flips the camera images vertically or horizontally.LDC Adjusts the Lens distortion correction to convert the image so that itmatches the square monitor.BACK-FOCUS Selects the back focus setting type and performs fine adjustment.SPECIALCHROMA GAIN Adjusts the chroma level (color density).AP GAIN Adjusts the aperture level.PEDESTAL Adjusts the pedestal (brightness) level.HUE Adjusts the chroma phase (hue).DISPLAY Performs the image display setting.PIX OFF Corrects image defects such as flaws.COMMUNICATION Performs the communication setting of the system with a receiver intowhich this unit is integrated.CAMERA RESET Restores the settings in the setup menu to the default settings.SER.NO. Displays the serial number of this unit.LANGUAGE Selects a language to be used in the setup menu.