Panasonic WV-CF344 Operating Instructions Manual

Also see for WV-CF344 Series: Operating instructions Features & specifications

Panasonic WV-CF344 Operating Instructions Manual Manual pdf 20 page image

20Step 1Move the cursor to "PRIVACY ZONE", select "ON (1)" or "ON (2)", and press the [SET] button.→ The "ZONE NUMBER" screen appears.Step 2Move the cursor to the number at the right of the title and select the zone number using the[RIGHT] or [LEFT] button.Step 3Move the cursor to "POSITION" and press the [SET] button.Step 4Use the [up], [down], [right], and [left] buttons to determine the left upper position of the zone tobe set and press the [SET] button.Step 5Use the [up], [down], [right], and [left] buttons to determine the lower right position of the zoneto be set and press the [SET] button.→ An asterisk "*" will be displayed after the number and the zone setting will be saved.Step 6When “ON (2)” is selected for “PRIVACY ZONE”, the mosaic level may be adjusted. The mosaiclevel may be set through “ZONE LEVEL”. (Range: 1 to 4)Note:• To delete a zone, select the zone number and press the [SET] button after moving the cursorto "DEL".• To change the settings of a zone, select the zone number and repeat from step 3.B Image stabilizer setting [STABILIZER]Whether or not to enable the image stabilizer is determined.This function is effective for the case that the camera is installed at a place with slight shaking.ON: Enables the image stabilizer.OFF (default): Disables the image stabilizer.Important:• When "ON" is selected for the image stabilizer, the view angle becomes narrower and the reso-lution becomes lower. When "ON" is selected for the image stabilizer, check the view angle andresolution at camera installation.• The image stabilizer function may not work for the following subjects.• Dark subject• Less contrasty subject (e.g. white wall)• Subject shaking at excessive speed• Large amplitude image shaking