Panasonic WJ-NX400K Installation Manual

Also see for WJ-NX400K: Operating instructions Important information Installation guide Important information Operating instructions

Panasonic WJ-NX400K Installation Manual Manual pdf 37 page image

37[Camera status]The model numbers and statuses of each camera will bedisplayed in a list.Displaying image: Displays the images from the camerausing the IP address that is newly registered or thathas already been registered.Changing IP address: Images are being obtained fromthe camera whose IP address has been changed.Undetectable: Cannot obtain images from the camera.Authentication error: Failed in the authentication to dis-play images from the camera.Important:• If "Undetectable" is displayed, check the camera con-nections, and retry the camera registration.• If "Authentication error" is displayed, initialized the cam-era and retry the camera registration by referring to theoperating instruction of the camera.• If the registered camera is not correctly detected or ifyou wish to change the camera settings, change theregistered information on the "Basic setup" menu - the"Camera" page - the "Camera registration" tab.(☞ Operating Instructions (PDF))[Refresh] buttonObtain the latest camera image after interchanging cameras.[Exit] buttonExits the setup menu and returns to the top screen of thesetup menu.[Next] buttonProceeds to the settings for recording.Step 9Perform the settings for recording. If the settings areperformed on "Easy Start", the settings will be appliedto all the cameras.[Frame rate]Select the recording frame rate.1 ips/ 3 ips/ 5 ips/ 10 ips/ 15 ips/ 30 ipsDefault: 10 ipsNote:• To apply 60 ips, configure on "Advanced recordingsetup" on the "Recording setup" tab under "REC &event" of "Basic setup".[Image quality]Selects the image quality of recorded images.NQ (Normal): Standard qualityFQ (Fine): High qualitySF (Super Fine): Super fine qualityXF (Extra Fine): Extra fine qualityDefault: FQNote:• If "XF" is selected when the compression method of thecamera is "MJPEG", "SF" will be set instead of "XF".[Referenced recording days]Calculates and displays the total number of days for whichrecording on the hard disk drives is available.Note:• The referenced recording days will be calculated basedon the assumption that recording is started on Monday.• The HDD consumption for the event recording will beexcluded.• If a camera manufactured by other than Panasonic isused, the value of "Referenced recording days" will notbe displayed.• When configured to perform recording in high resolutionand high quality, recording may sometimes not be per-formed at the specified rate.When there may be possibility to fail recording at thespecified rate while using only Panasonic cameras, theconfirmation window will be displayed.Step 10Click the [Exit] button.→ Saves the settings and returns to the top screen of thesetup menu.When the camera image is displayed on the main monitor orthe web browser on the PC and can be recorded or played,the recorder is ready for operation.8 Configure the minimum settings [Easy Start] (continued)

/ 40

Related manuals for Panasonic WJ-NX400K