Panasonic WJ-NX400K Installation Manual

Also see for WJ-NX400K: Operating instructions Important information Installation guide Important information Operating instructions

Panasonic WJ-NX400K Installation Manual Manual pdf 35 page image

35[Time]Set the current time.Step 3Click the [Apply] button after setting the date & time.→ The second will be set to "00".[Set time zone]Select your time zone.GMT-12:00 - GMT+13:00Default: GMT-5:00 (WJ-NV400K)GMT (WJ-NV400K/G)Marking the checkbox for [Activate the Daylight saving time]will active daylight saving time.Step 4Click the [Next] button.→ The camera registration window opens.Note:• To use the existing IP address of the connected cameras,refer to "Detect cameras for registration [Detect cameras]"(☞ Operating Instructions (PDF)) instead of "Easy start".• Before the settings, register the cameras into the net-work. Only the cameras added by license registration willbe detected even though more cameras than the regis-tered license number are connected.It is recommended to disconnect unnecessary cameras.• Cameras shall be connected to the Camera/PC port.Cameras will not be detected if they are connected tothe PC port.Step 5Register the cameras connected to the recorder.The minimum settings required to operate the recorder, such as the date & time, camera registration, recording, can be config-ured on the setup menu - the "Quick setup" menu - "Easy Start".First, configure the minimum settings on "Easy Start", and to configure more advanced settings, go to each setup page.Available settings on "Easy Start"Step 1Click the [Easy Start] button on the top screen of thesetup menu.Refer to "Basic operations" (☞ page 7) for how to display thesetup menu.→ The setup menu for the date & time will be displayed.Step 2Set the date & time.[Date]Set the current date. Select the year, month and day fromthe calendar.[<>] button: Selects the previous or next year.[] button: Selects the previous or next month.• Date & time of the recorder• Camera registration• Order change of the registered camera numbers• Recording frame rate and image quality* Other settings will remain default or will be conformed to the camera settings.* To apply 25, 50 or 60 ips for the recording frame rate, configure on the advanced recording setup (for each camera) on the"Recording setup" tab under "REC & event" of "Basic setup", but not on Easy Start.* To reset the time, do not use "Easy Start", and go to "Basic setup" menu - "Date/Language" page.8 Configure the minimum settings [Easy Start]