Panasonic WJ-MPU955A Operating Instructions Manual

Also see for WJMPU955A - CENTRAL PROCESSING UNIT: User guide Installation guide

Contents

56After the login procedure, the following operations are avail-able to control the system.The operation begins with monitor selection. Then, theimage of selected camera appears on the active monitor. Monitor Selection1. Select the desired monitor number by pressing thenumeric buttons. The entered number will appear onthe LCD.2. Press the MON (ESC) button.When the selected monitor number is correct, <" is dis-played.Note: To select the next or previous monitor number, pressthe + or – button. Camera Selection1. Select the desired camera number by pressing thenumeric buttons. The entered number will appear onthe LCD.2. Press the CAM (SET) button.When the selected camera number is correct, >" is dis-played.Note: To select the next or previous camera number, pressthe + or – button.Monitor Selection and Camera Selection Monitor LockMonitor lock is the function to retain other operators' controlof a monitor even after that operator has selected anothermonitor.Note: This function will prevent operators with a lower prior-ity from gaining control of a monitor. However, opera-tors with a higher or the equal priority can gain the con-trol of monitor.1. Select a desired monitor. (Refer to Monitor Selection.)2. Press the MON LOCK/LOGOUT button. The monitorlock mode is activated, the monitor number with "L"sign is displayed on the active monitor, and "L" willappear beside "MON" on the LCD.Note: Every time you press the MON LOCK/LOGOUTbutton, the monitor lock mode will be activated ordeactivated.MON 123 CAMUnit:01MON CAM0123MON 512 CAM0123MON CAM0123 Unit:01 >00512LMON CAM0123 Unit:01 00512