Panasonic WJ-HD88 Operating Instructions Manual

Also see for WJ-HD88: Brochure & specs Network operating instructions

Panasonic WJ-HD88 Operating Instructions Manual Manual pdf 30 page image

302.5.3 Zoom(1) Select the zoom/focus mode by pressing the [SET] but-ton twice.The zoom/focus icon is displayed on the screen ofthe selected channel.(2) Press the direction button (up or down) to control thecamera’s zoom.(3) Press the [SET] button twice. The zoom/focus mode iscancelled.2.5.4 Focus(1) Select the zoom/focus mode by pressing the [SET] but-ton twice.The zoom/focus icon is displayed on the screen ofthe selected channel.(2) Adjust the focus by pressing direction buttons(right/left).(3) Press the [SET] button twice. The zoom/focus mode iscanceled.2.5.5 Iris(1) Select the iris control mode by pressing the [SET] but-ton 3 times.The iris control icon is displayed on the screen ofthe selected channel.(2) Adjust the iris by pressing direction buttons (right/left).(3) Cancel the iris control mode by pressing the [SET] but-ton once.2.5.6 To register preset position of cameras(1) Press the [SET] button 1 - 3 times to select the requiredcamera control mode.An icon is displayed on the screen of that channel,according to the selected camera control mode.(2) Press the [REC] button to display the Register PresetPosition window.Enter the desired preset position number, and thenpress the [SET] button or click the [OK] button afterpressing the [SET] button.Notes:1. Refer to descriptions about "PRESET INFORMA-TION" ("WJ-HD88 SETUP" – "PTZ SETUP" – "PRESETINFORMATION") for the settings of preset positionsof cameras.2. Up to 64 preset positions can be registered.3. When setting preset positions for Panasonic cam-eras, the indication "MEMORY" will be displayed atthe center of the screen by pressing the [SET] but-ton. If the indication is not displayed, the camera isnot recognized.2.5.7 To move a camera to the home position(1) Press the [SET] button once to select the required cam-era control mode.An icon is displayed on the screen of that channel,according to the selected camera control mode.(2) The camera returns to the home position by pressingthe [STOP] button.Notes:1. For the settings of the camera home position, referto the operating instructions for the camera.2. If the camera is not a Panasonic, the present posi-tion is saved as an origin, in principle, if the [STILL]button is pressed in the camera control mode. Forsome cameras, however, this setup may fail. Referto the operating instructions for the camera fordetails.2.5.8 To display the camera setting menuPrior to controlling the camera that has been connected tothis unit, perform the settings for this camera, without fail,according to the "CAMERA SETUP" menu for this unit.The contents, operating method, and other items of the"CAMERA SETUP" menu can differ according to the camerabeing used. Refer to the operating instructions for the cam-era for details.(1) Select the desired camera by using the camera selec-tion button (1 - 8) or the direction button (up/down) dur-ing the live monitoring screen.The image frame of the selected channel (camera)blinks.(2) Select the pan/tilt control mode by pressing the [SET]button once.The camera pan/tilt control icon is displayed on thescreen of the selected channel.(3) Press the [MENU] button.The setup menu of the corresponding camera is dis-played on the screen of the selected channel. In addi-tion, the camera menu icon is displayed on the rightof the pan/tilt control icon.The camera setup buttons are specified as follows:Cursor movement: up or down of the direction buttonPreset value amendment: right or left of the directionbutton[SET] button to open the next menu after defining thepreset value. [SET] buttonReturn to the previous menu. [ESC] buttonOKPreset NumberPRESET REGISTCancel001