323. SetupSetup Menu ListSetting Item"SYSTEM MANAGEMENT""SYSTEM SETUP""DISK INFORMATION""REBOOT SYSTEM""PICTURE ADJUST""TIME & DATE""VERSION""SEARCH"DescriptionBasic operation settings of this unitHDD information and initializationRestart of this unitScreen adjustment of each channelTime and date settingVersion confirmation of the softwareRecording data check and playbackTimer recording settings of each channel"REC & EVENT SETUP""TIMER REC""TERMINAL REC" Terminal recording settings of each channel"VMD REC" VMD recording settings of each channel"RECORD LENGTH" Partial length of recording"AUDIO SELECT" Selection of the presence of audio"PTZ SETUP"PTZ selection"PTZ SELECT""PRESET INFORMATION" PTZ preset position check"CAMERA SETUP" Camera connection check and protocol settings"COMMUNICATION SETUP"Settings for network IP address, gateway, etc."NETWORK SETUP""RS485 SETUP" Settings for RS485 communication"DATA PORT SETUP" Settings for serial data communication"REPORT""SYSTEM LOG""EVENT LOG""OLDEST DATA INFORMATION""USER INFORMATION""USER LEVEL SETUP"Operating log of this unit, and trouble logLog at event occurrenceTime of the oldest recording data on the hard discFunctional setup to enable the user at each level to operate in each channel"ONLINE USER INFORMATION" Display of IP address for on-line user"PASSWORD" User password setup at each level"KEYLOCK" Keyboard lock"DATA MANAGEMENT""FACTORY DEFAULT""BACKUP"Returning each setup parameter to the default settingsRecorded data backup in the external hard disk