Panasonic Viera TX-L32D26BA Operating Instructions Manual

Also see for TXL42D26B: Service manual

Contents

Panasonic Viera TX-L32D26BA Operating Instructions Manual Manual pdf 88 page image

88Link Functions (Q-LinkVIERA Link)Direct TV Recording - What you see is What you record Direct TV RecRecording the current programme on a DIGA Recorder immediately.If you connect a variety of recorders including other manufacturers’ recorders at the same time, please●connect the DIGA Recorder to the TV’s lower HDMI terminal number. For example, if you use HDMI1 andHDMI2 for two recorders, connect the DIGA Recorder to HDMI1.If Direct TV Recording does not operate, check the settings and the equipment● “Summary of Q-Link and VIERA Link features” (p. 84 and p. 85), “Preparations” (p. 87)If you wish to record a programme that the DIGA Recorder does not support, a SCART connection is required●and the programme is recorded by Q-Link function (p. 86).Depending on the programme, a SCART connection may be required to record.●Changing channel or turning off the TV is available while the recorder is recording from its own tuner.●Changing channel is not available while the recorder is recording from the TV tuner.●EXITGUIDEDIRECT TV REC1 Display “VIERA Link Menu”2 Select “Direct TV Rec” and start recordingVIERA Link MenuPause Live TV StartDirect TV RecVIERA Link ControlSpeaker SelectionStartRecorderHome Cinema selectstartYou can also start recording directly● DIRECT TV RECTo stop recording■Select “Stop” in “Direct TV Rec” and accessVIERA Link MenuPause Live TV StartDirect TV RecVIERA Link ControlSpeaker SelectionStopRecorderHome CinemaselectstopYou can also stop recording directly.● Unlock the tunerGUIDE UnlockContinueTuner LockedPress EXIT to unlock and stop recordingEXITFeatures available■ (Using VIERA Link Menu)Features available■Reduce unnecessary power consumption in standby Standby Power SaveSet Standby Power Save “On” in the Setup Menu to use this function“Standby Power Save” (p. 34)The power consumption in Standby mode of the connected equipment is controlled in synchronization with theTV On / Off state.When the TV is set to Standby mode, the connected equipment is automatically set to Standby and the powerconsumption in Standby mode of the connected equipment is automatically minimized.When the TV is turned on and the connected equipment is still in Standby mode, the power consumption of theconnected equipment is increased to reduce the startup time.This function is effective if the connected equipment can change the power consumption in Standby mode●and is set to higher consumption.Auto standby for unnecessary equipment Intelligent Auto StandbySet Intelligent Auto Standby “On (With reminder)” or “On (No reminder)” in the Setup Menu touse this function“Intelligent Auto Standby” (p. 34)When the TV is On, non-watched or non-used connected equipment goes into Standby mode automaticallyto reduce power consumption. For example, when the input mode is switched from HDMI, the connectedequipment will go into Standby mode / when Speaker Selection is changed to “TV”, the Player theatre will gointo Standby mode (except when watching a disc).If you select “On (With reminder)”, the on screen message will be displayed before the connected equipment●turns to Standby.This function may not work properly depending on the connected equipment. If required, set to “Off”.●